BIS - Your Safety Partner

V-GARD PROTECTIVE CAP

admin — Thu, 12 Jun 2014 03:14:38 +0000

BRAND: MSA
MODEL NO: 475358

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.

Polyethylene shell provides superior impact protection
Self-adjusting crown straps ensure a comfortable fit
4-point ratchet suspension
Made in USA

DISPENSING BOTTLE FOR FLAMMABLE LIQUIDS

admin — Tue, 17 Dec 2013 16:01:52 +0000

BRAND: JUSTRITE
MODEL NO: 14009

Material Specifications: Polyethylene
Capacity: 16 ounces
Dimensions Exterior: 7.5″ H x 3″ Outer Dia. (191 H x 76 Outer Dia. mm)

Squeeze Bottles made of polyethylene with a stainless steel wire, provide safe dispensing of flammable liquids directly on small components or subassemblies with a minimum of over-spray. Squeezing the bottle produces a fine stream of liquid. Stem can be shaped to dispense into hard-to-get areas.

POLYPROPYLENE FUNNEL FOR TYPE I STEEL CANS

admin — Tue, 17 Dec 2013 15:59:42 +0000

BRAND: JUSTRITE
MODEL NO: 11202Y

Material Specifications: Polypropylene
Dimensions Exterior: 11.25″ L x 0.5″ Outer Dia. (286 L x 13 Outer Dia. mm)

For use with steel Type I Justrite safety cans 1 gallon (4L) and above.

WHITE POLYETHYLENE FUNNEL FOR POLY CANS

admin — Tue, 17 Dec 2013 15:55:00 +0000

BRAND: JUSTRITE
MODEL NO: 11201

Polyethylene Pour Funnel for 14065 and 14160 Safety Cans for facilitating pouring.

DRUM COVER FOR 55 GAL DRUM

admin — Tue, 17 Dec 2013 15:53:34 +0000

BRAND: JUSTRITE
MODEL NO: 26753

Material Specifications: Steel
Approvals: FM
Compliance: EPA, NESAM

Model No 26753 complies with NESAM (National Emmisions Standard for Aerospace Manufacturing) by offering a gasketed, spring-loaded self-latching and vented lid with rotary latch mechanism to seal the drum, thereby preventing vapor release. It automatically closes via gravity when released and then automatically latches, preventing the drum from being left open by mistake. This eliminates the chance for oxygen to enter and start a fire.

Durable steel construction with powder-coat finish provides excellent chemical resistance. Ideal for the aircraft, furniture, and printing industries or anywhere solvent-soaked cloths are used.

WASTE RECEPTACLE SAFETY DRUM CAN 55 GAL

admin — Tue, 17 Dec 2013 15:52:13 +0000

BRAND: JUSTRITE
MODEL NO: 26054

Material Specifications: Steel
Capacity: 55 gallons (200 litres)
Dimensions Exterior: 34.5″ H x 23.75″ Outer Dia. (876 H x 603 Outer Dia. mm)

Cease-Fire® drum bodies are made from heavy-gauge steel and have rust-preventative interior coating. Both aluminum and steel heads are available separately for use with metal drums.

SAFETY CAN FOR LIQUID DISPOSAL 5 GAL

admin — Tue, 17 Dec 2013 15:50:47 +0000

BRAND: JUSTRITE
MODEL NO: 14765

Material Specifications: Polyethylene
Capacity: 5 gallons (19 litres)
Dimensions Exterior: 20″ H x 12″ Outer Dia. (508 H x 305 Outer Dia. mm)
Fill/Pour Hole: 3.65″ (93 mm)
Approvals: FM

High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. The broad-base design provides stability and resists accidental tip over.

DIP TANK FOR CLEANING PARTS 8 GAL

admin — Tue, 17 Dec 2013 15:45:00 +0000

BRAND: JUSTRITE
MODEL NO: 27608

Material Specifications: Polyethylene
Capacity: 8 gallons (30 litres)
Dimensions Exterior: 14.25″ H x 15.625″ Outer Dia. (362 H x 397 Outer Dia. mm)
Approvals: FM, TUV

Use for cleaning parts and subassemblies where the volume of work does not warrant a larger rinse tank. Portable size accommodates changing production requirements. Dip tank covers stay open for convenient access; self-closing mechanism and fusible link melts at 165°F (74ºC) to snap the cover shut in case of fire. Dip tank with polyethylene liner offers outstanding chemical resistance to permit use with the harsh, corrosive chemicals.

DIP TANK FOR CLEANING PARTS 2 GAL

admin — Tue, 17 Dec 2013 15:40:27 +0000

BRAND: JUSTRITE
MODEL NO: 27602

Material Specifications: Polyethylene
Capacity: 2 gallons (8 litres)
Dimensions Exterior: 10″ H x 9.375″ Outer Dia. (254 H x 238 Outer Dia. mm)
Approvals: FM, TUV

BENCH CAN FOR SOLVENTS 1 GAL

admin — Fri, 13 Dec 2013 18:31:50 +0000

BRAND: JUSTRITE
MODEL NO: 10370

Material Specifications: Steel
Dasher Assembly: Steel
Capacity: 1 gallon (4 litres)
Dimension Exterior: 4.5″ H x 9.375″ Outer Dia. (114 H x 238 Outer Dia. mm)
Dasher: 7.5″ (191 mm)
Approvals: FM

Simply place work on spring-loaded, perforated dasher plate, press down and agitate, then release to return dasher to drain position. Plated steel dasher also works as an effective flame arrester to reduce the risk of fire flashback. Hinged cover minimizes evaporation losses and protected rim reduces the possibility of hand injury. Cans are made of sturdy 24-gauge steel with tough powder-coat finish.

PLUNGER DISPENSING CAN 1 GAL

admin — Fri, 13 Dec 2013 18:29:45 +0000

BRAND: JUSTRITE
MODEL NO: 10308

Material Specifications: Steel
Dasher Assembly: Steel
Plunger Assembly: Brass & Ryton
Capacity: 1 gallon (4 litres)
Dimension Exterior: 10.5″ H x 7.25″ Outer Dia. (267 H x 184 Outer Dia. mm)
Dasher: 5″ (127 mm)
Approvals: FM, TUV

Dispense flammable liquids and solvents safely, without waste or exposure. Made of chemically resistant Ryton® and brass, the pump base is designed to leave less liquid in the bottom before having to refill.

Pushing down on the pump assembly fills the upper pan with liquid. Surplus liquid drains safely back into reservoir. The perforated upper pan serves as a flame arrester. Top rim has molded edge protector for smooth, trouble-free moistening.

PLUNGER DISPENSING CAN 2 QUARTS

admin — Fri, 13 Dec 2013 18:23:08 +0000

BRAND: JUSTRITE
MODEL NO: 10208

Material Specifications: Steel
Dasher Assembly: Steel
Plunger Assembly: Brass & Ryton
Capacity: 2 quarts
Dimension Exterior: 200 H x 184 Outer Dia. (mm)
Dasher: 5″ (127 mm)
Approvals: FM, TUV

Dispense flammable liquids and solvents safely, without waste or exposure. Made of chemically resistant Ryton and brass, the pump base is designed to leave less liquid in the bottom before having to refill.

CRYOSKIN CRYOGENIC EXTREME COLD

admin — Tue, 16 Apr 2013 10:12:39 +0000

BRAND: ELLIOTTS
MODEL NO: EACRYOG15L

Cryoskin® Cryogenic Extreme Cold Safety Gloves

Extremely durable CryoSkin® outershell material.
Excellent liquid nitrogen protection.
Waterproof Porelle liner.
Thermal liner.
Excellent grip and abrasion resistance.
Comfortable and light weight.
Available in sizes M, L, XL.

Applications:

Bio-medical
Food Preparation
Laboratories
Liquid Nitrogen Handling
Pharmaceutical

PVC GAUNTLET

admin — Sat, 24 Nov 2012 05:34:16 +0000

BRAND: CIG SAFETY
MODEL NO: CIG6414

Gauntlet style
PVC fully coated
14″ length

C500 WET

admin — Sat, 17 Nov 2012 14:00:06 +0000

BRAND: UVEX
MODEL NO: 60492

The C500 cut protection safety gloves range set new standards in protection, comfort, flexibility, dexterity and economy. Our new high-tech product concept with highest cut level 5 combines all of these properties.

Patented uvex Bamboo TwinFlex®
Technology Innovative SoftGrip coating
Highest cut resistance level 5
Highest wearing comfort due to uvex climazone
Outstanding tactile feel
High abrasion-resistance
Flexible
Silicone-free according to imprint test
Length: approx. 27 cm

TROLLEY SPILL KIT 30 GAL

admin — Mon, 29 Oct 2012 11:02:57 +0000

BRAND: SRAPP
MODEL NO: K2A

30 gallon spill kit
Universal type for absorption of non-aggressive and aggressive fluids
40 pcs of pads
12 pcs of pillows
4 pcs of socks
2 pcs of waste bag
1 pr of safety goggles
1 pr of gloves

95 GAL SPILL KIT

admin — Mon, 29 Oct 2012 11:01:11 +0000

BRAND: SRAPP
MODEL NO: GPSK-95

Universal type for absorption of non-aggressive and aggressive fluids
48″ x 32″

TRUCKER SPILL KIT

admin — Mon, 29 Oct 2012 10:57:27 +0000

BRAND: SRAPP
MODEL NO: GPSK-TRK

Universal type for absorption of non-aggressive and aggressive fluids
20″ x 20″ x 7″

TEMP-SEA 770 COLD PROTECTION

admin — Thu, 25 Oct 2012 10:13:02 +0000

BRAND: MAPA PROFESSIONNEL
MODEL NO: 770

Thermal insulation 100% liquid-proof to protect from extreme contact cold

PVC specially designed for use in extreme cold (-30°C) whilst preserving the flexibility of the glove
Good resistance to oils, greases and hydrocarbons

Specific features

Acrylic fleece lining for excellent thermal insulation, and greater comfort.

Applications

Food industry
- Maintenance and work in cold stores
Fishing and Work at sea
- Handling produce
Transport
- Handling of liquids at low temperatures (water, oil, hydrocarbons, etc.)

PYROVATEX

admin — Wed, 24 Oct 2012 18:45:50 +0000

PYROVATEX® was introduced in the 1960s as a durable flame retardant product for cellulosic fibers. Continuous improvements have reflected changes in market requirements and environmental issues. From its introduction until today, however one thing has remained constant—PYROVATEX® offers the maximum combination of overall flame and heat protection and unsurpassed comfort in treated garments. PYROVATEX® has been used to treat more than 100 million square meters of fabric. Garments produced from these fabrics provide people around the world with life saving protection.

Maximum protection
PYROVATEX®
• treated fabrics offer the best overall flame protection available for cotton, as proved by comprehensive testing in line with international flame retardant standards.
• treated fabrics barely shrink when exposed to heat and flames, thereby ensuring that the skin is not exposed to hazardous conditions.
• treated cotton, unlike synthetics, will not melt in the presence of heat and flames. Melted cloth presents a risk to the wearer.
• treated fabrics afford excellent thermal protection when heat is an added danger.

Excellence in use
PYROVATEX®
• treated fabrics have outstanding durability to wash and wear, which assures long life of the clothing.
• finishes have negligible influence on fabric coloration and therefore preserve flexibility to meet specific color demands.
• treated fabrics have good compatibility with other treatments, permitting the creation of multifunctional garments.
• treated fabrics can also fulfill TEFLON® standards in providing a durable barrier against water, oil, and dirt.

Superior comfort
Garment comfort is essential for effective workwear. Wearing of these garments is usually accompanied by strenuous physical effort; therefore comfortable clothing is more likely to be used—and used properly. It is no coincidence that cotton is the most widely used fiber in the world. Its inherent soft-ness is enhanced by its ability to keep the wearer cool in hot climates, and warm in cold climates. Additionally, it offers a breathability that is far superior to that of synthetic fibres. PYROVATEX® treatment is not detrimental to the comfort of cotton. Some flame retardant finishes work by forming “films”, or complexes, on the surface of the garment, resulting in a stiffer handle. Fabrics treated with PYROVATEX® maintain their original softness.

NOMEX III A

admin — Wed, 24 Oct 2012 18:38:56 +0000

The Leader in Flame-Resistant Protection
For more than 30 years, protective apparel made from DuPont™ NOMEX® brand fiber has provided superior thermal protection from flames, flash fires and electric arcs. The unique molecular structure of NOMEX® makes it inherently flame resistant. Garments of NOMEX® protect workers in the petroleum, petrochemical, chemical, and electric and gas utility industries. Professional firefighters, racecar drivers, U.S. military personnel and NASA astronauts also wear garments of NOMEX®.

Unmatched Thermal Performance
The effectiveness of NOMEX® has been proven and documented in laboratories, field tests and real-life flash fire and electric arc situations. Garments of NOMEX® consistently provide outstanding thermal performance because NOMEX® IIIA:

Is inherently flame resistant.
Inherent thermal protection that cannot be washed away.
Durable and resistant to abrasion, tears, and chemicals.
Does not burn or melt and drip.
Provides permanent protection that won’t wash out or wear away.
Minimizes break-open and maintains a stable, inert barrier between the fire/arc and skin, protecting the wearer from direct exposure.
Forms a tough, protective char when exposed to flame, and stays supple until it cools.
Meets the NFPA 1975 for firefighters’ stationwear.
Meets the ASTM F1506 standard for workers’ apparel as protection from electric arc exposure.
Complies with NFPA 70E Standard for Electrical Safety in the Workplace
Complies with NFPA 2112 Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
Widely used by petroleum, petrochemical, chemical, and utility industries, as well as firefighters.

Durability and Cost Effectiveness
Garments made with NOMEX® thermal technology are extremely durable and resist abrasion, tears and chemicals. They’re also an excellent value, lasting three to five times longer than other standard and protective fabrics, including 100% cotton and flame-retardant treated (FRT) cotton. In lease, rental and purchase programs, the out-standing wear life of garments of NOMEX® IIIA can contribute to bottom-line savings.

Anti-Static Performance
Workers must be constantly aware of static electricity hazards and must use proper grounding procedures, both for themselves and equipment. As an added margin of safety, garments of DuPont™ NOMEX® IIIA reduce the clothing’s contribution to static charge buildup on the body. NOMEX® IIIA is made with a static-dissipative fiber, which reduces the static generated in both fabric-to-fabric and fabric-to-surface rubbing, even in low humidities. NOMEX® IIIA also reduces static cling, which makes the garment more comfortable to wear.

Lightweight Comfort
Garments of NOMEX® are as comfortable to wear as other work clothing. Lightweight, breathable fabrics of NOMEX® brand fiber are designed to transport moisture away from the skin, which helps wearers feel cool and dry. Side-by-side wear tests show that fabric weight is the single greatest factor in controlling garment comfort, and that the lightweight comfort fo NOMEX® is often preferred over other protective fabrics. In addition, protection apparel of NOMEX® is available in a variety of fabric weights to suit any climate.

Professional Appearance
Flame-resistant protective apparel of NOMEX® combines style and functionality with a professional appearance. NOMEX® is available in a wide range of colors and garment styles, including jackets, parkas, slacks, jeans, shirts, polar fleece and switching coats.

Easy Care
Garments of NOMEX® are easy to launder and rarely need pressing. Normal home or commercial laundering and dry cleaning techniques provide good results. The protection is permanent and cannot be washed out or worn away.

RAINCOAT U01

admin — Wed, 24 Oct 2012 17:43:45 +0000

BRAND: CIG SAFETY
MODEL NO: CIG1U01

Conforms to EN471 class 3, Polyester/PU coating
Colour: Fluorescent Yellow, Fluorescent Orange
Logo printing available

RAINSUIT J15

admin — Wed, 24 Oct 2012 17:43:22 +0000

BRAND: CIG SAFETY
MODEL NO: CIG1J15

Conforms to EN471 Class 3
Polyester/PU coating
Outshell: 250D polyester oxford/PU breathable coated
Lining: 100% nylon
Padding: 100% polyester 180 grams
Logo printing available

COTTON COVERALLS W/ TAPE

admin — Wed, 24 Oct 2012 17:14:12 +0000

MODEL NO: CTC1952 / CTC2602

This classic overall offers nine functional pockets and are best suited for Offshore, Shipbuilding or Ship repair yard where high visibility and safety are non – compromised.

A combination of quality materials, design to produce a workwear for the offshore industries.

Usually in Cotton, which has the ability to absorb and release excess heat. Used mainly for Offshore, Marine, Oil & Gas industries where synthetic fibres are not allowed due to safety reasons. Available also in Polyester Cotton for custom orders.

With reflective strip 50mm across shoulders, arms & legs for high visibility
Loops for radio antenna on shoulder
Two large chest button flap pocket with pen slot
One tool slot on left sleeve
Button Cuffs
Two-way zipper with concealed stud fastening
#8 sized plastic zipper with closed ended
Side elastic waistband
Two Large side pockets
Bartack stitching on stress points
Available in 195gsm or 260gsm
Choose from 7 available colours (orange, navy blue, white, red, light blue, grey & kaki)

COTTON COVERALLS

admin — Wed, 24 Oct 2012 17:13:25 +0000

MODEL NO: CTC1950 / CTC2600

A one-piece clothing that has full length sleeves and legs like a jumpsuit, with no gap between jacket & pants. Worn over normal clothes to give additional protection at work.

Our work wear garments made from cotton deliver comfort and confidence for all industries across the globe. These versatile and durable products meet our high standards for superior construction, and are check for fit, wear, comfort. With your ever changing needs as our top concern, each garment is designed to meet a specific task.

Practical design
Quality manufacture
Maximum performance
Comfortable fitting
Double stitching
Customisation available
Choose from 7 available colours (orange, navy blue, white, red, light blue, grey & kaki)
Soft, lightweight and pliable cotton fabric can be comfortable worn directly against the skin
Cotton adds warmth in cold weather and also feels cooler than synthetic fabrics in warm environments
As a natural fabric, Cotton is able to attract moisture and transmit is away from the body, keeping the wearer dry
Cotton offers good wear and performance
Lightweight Cotton, 195gsm are best suited for hydro-blasting, fitting, painting or general tasks
Heavyweight Cotton, 260gsm performs well for blasting, welding, fabrication where durable is a necessity

GREEN GOLD

admin — Wed, 24 Oct 2012 16:38:26 +0000

BRAND: CIG SAFETY
MODEL NO: CIG6460

High quality leather gloves protect your hand from heat and welding spark
Fully lining
Reinforced palm
Length 15.5”

MAX EARMUFF FOLDABLE

admin — Wed, 24 Oct 2012 16:28:55 +0000

BRAND: CIG SAFETY
MODEL NO: CIG5299

New designed high performance.
Earmuff for high noise environments. Highest rate earmuff available also in low frequency dominated environments.
Padded headband and super soft ear cushions for a comfortable fit while ensuring full time protection, maximum compact and foldable earmuffs.
Oversized ear cups increase the effectiveness of max weight 244g
SNR 36 dB. NRR 30dB

STREAMLIGHT PROPOLYMER 2AA

admin — Wed, 24 Oct 2012 16:17:02 +0000

BRAND: STREAMLIGHT
MODEL NO: ATEX2AA

BUILT TO WORLD CLASS STANDARDS. CARRIED BY WORLD CLASS FIREFIGHTERS. Streamlight® torches have long been regarded as the world’s most trusted torches. The unparalleled quality that built that reputation shines as brightly as ever in the ATEX-approved line of firefighting and industrial torches. These models are approved for hazardous locations, and offer extensive features, including extreme-brightness, long runtimes, and waterproof, virtually unbreakable polymer construction. Streamlight torches: world class quality, world wide trust.

Tough, super-convenient, extra bright flashlight features dual switching on the head and the tail cap.

Powered by 2 “AA” alkaline batteries
Xenon gas-filled bi-pin bulb, many times brighter than conventional flashlights
4,500 candela (peak beam intensity), 9 lumens
Runs 4 continuous hrs.
Waterproof/IPX7
Features a wrist lanyard connection and pocket clip
15.4cm / 104.9g
Assembled in USA

CLEAR LENS CLEANING TOWELETTES 100PC/BX

admin — Wed, 24 Oct 2012 08:57:22 +0000

BRAND: UVEX
MODEL NO: S468

Specifically formulated for anti-fog and scratch resistant hardcoat lenses and do not contain silicone. Available in toweletts, non-abraisive tissues, 16 oz refillable spray and 1 gallon refill.

CLEAR DISPOSABLE LENS CLEANING STATION

admin — Wed, 24 Oct 2012 08:54:58 +0000

BRAND: UVEX
MODEL NO: S467

Specifically formulated for anti-fog and scratch resistant hardcoat lenses and do not contain silicone. Available in toweletts, non-abraisive tissues, 16 oz refillable spray and 1 gallon refill.

CLEAR LENS CLEANING SOLUTION 16OZ

admin — Wed, 24 Oct 2012 08:52:18 +0000

BRAND: UVEX
MODEL NO: S463

Specifically formulated for anti-fog and scratch resistant hardcoat lenses and do not contain silicone. Available in toweletts, non-abraisive tissues, 16 oz refillable spray and 1 gallon refill.

CLEAR LENS CLEANING TISSUES 500PC/BX

admin — Wed, 24 Oct 2012 08:48:04 +0000

BRAND: UVEX
MODEL NO: S474 (formerly known as S462)

Specifically formulated for anti-fog and scratch resistant hardcoat lenses and do not contain silicone. Available in toweletts, non-abraisive tissues, 16 oz refillable spray and 1 gallon refill.

CLEAR LENS CLEANING STATION

admin — Wed, 24 Oct 2012 08:47:05 +0000

BRAND: UVEX
MODEL NO: S484 (formerly known as S461)

Specifically formulated for anti-fog and scratch resistant hardcoat lenses and do not contain silicone. Available in toweletts, non-abraisive tissues, 16 oz refillable spray and 1 gallon refill.

H100 1-PLY PAD

admin — Sun, 21 Oct 2012 13:17:05 +0000

BRAND: SRAPP
MODEL NO: H100

For use with oil and petroleum based fluids.

Type: oil only
Configuration: pad
Size: 15″x19″
Count: 100
Unit Of Sales: bale
Packaging: bale
Shipping Weight: 14 lbs
Absorbency: 35 gal/bale

MAGNA NOMEX FIRE FIGHTING SUIT

admin — Sun, 21 Oct 2012 12:09:36 +0000

BRAND: CIG SAFETY
MODEL NO: CIGMAGNA

Contoured collar designed for maximum thermal protection
Throat tab with velcro closure
Heavy duty zipper with 25mm velcro closure system contour cut, sey in sleeves combine to provide ease of mobility and minimum coat rise
Large pockets with velcro flap closure
Waistband with adjustable velcro tabs for maximum adjustment and attachments for Y or H style braces
Two pockets with velcro flap closure and drain holes
Choice of trim designs and colours
Standard trim design shown
Sleeves feature adjustable velcro/webbing wristers for total protection
Double layer of outer shell fabric over knee and lower leg section for extra protection

FIRST AID BOX HEAVY VEHICLE

admin — Sun, 21 Oct 2012 11:40:11 +0000

MODEL NO: FABHV

For general use and on private buses, lorries, vans and other light commercial vehicles.

GREEN PLASTIC BOX 31.0cm x 16.0cm x 8.5cm (12” x 6.5” x 3.5”)
EUROPLAST 10′S 1
SINGLEFIX FINGER DRESSING 2
TELESCOPIC SPLINT 1
ROLLER BANDAGE 3” 3
TRIANGULAR BANDAGE 2
CONSTRICTIVE BANDAGE 1
CONFORMING BANDAGE 4
HYGIENIC CLEANSING WIPE 10
ALCOHOL PREP PAD 6
AMMONIA INHALANT 2
ABSORBENT GAUZE 10’S 1
COTTON BALL 10’S 1
ANTISEPTIC CREAM 1
HYPOALLERGENIC TAPE 1
SAFETY PIN 12′S 1
SHEARS 1
FIRST AID ON THE ROAD 1
STICKER “FIRST AID KIT CARRIED” 1

FIRST AID BOX PUBLIC SERVICE VEHICLE

admin — Sun, 21 Oct 2012 11:36:03 +0000

MODEL NO: FABPSV

Recommended by Registry of Vehicles (ROV) for use on public service vehicles where the seating capacity exceeds 7 persons.

GREEN PLASTIC BOX 31.0cm x 16.0cm x 8.5cm (12” x 6.5” x 3.5”)
NO. 8 DRESSING MEDIUM 3
NO. 9 DRESSING LARGE 1
NO. 16 DRESSING EYE PAD 1
CONFORMING BANDAGE 3
TRIANGULAR BANDAGE 2
CONSTRICTIVE BANDAGE 1
COTTON WOOL 15G 1
HYPOALLERGENIC TAPE 1
SHEARS 1
SAFETY PIN 12′S 1
TELESCOPIC SPLINT 1
FIRST AID ON THE ROAD 1
STICKER “FIRST AID KIT CARRIED” 1

FIRST AID BOX PASSENGER VEHICLE

admin — Sun, 21 Oct 2012 11:33:39 +0000

MODEL NO: FABPCV

This complete kit is most suitable for passenger vehicles. Every passenger vehicle should carry a First Aid Kit. The Passenger Carrying Vehicle kit complies with the latest mini bus / coach regulation from the confederation of passenger transport, U.K.

GREEN PLASTIC BOX 31.0cm x 16.0cm x 8.5cm (12” x 6.5” x 3.5”)
EUROPLAST 10′S 2
NO. 9 DRESSING 3
NO. 16 DRESSING EYE PAD 2
TRIANGULAR BANDAGE 2
CREPE BANDAGE 2” 1
CREPE BANDAGE 3” 1
CONFORMING BANDAGE 1
SAFETY PIN 12′S 1
HYGIENIC CLEANSING WIPE 10
SHEARS 1
DISPOSABLE GLOVE (PAIR) 1
FIRST AID ON THE ROAD 1
STICKER “FIRST AID KIT CARRIED” 1

FIRST AID BOX MOM 100M

admin — Sun, 21 Oct 2012 11:25:00 +0000

MODEL NO: FABMOM100

Recommended minimum contents of first aid box by the Ministry of Manpower (MOM), for use by every 100 workers.

WHITE PLASTIC BOX 39.3cm x 30.5cm x 12.0cm (16” x 12” x 5”)
EUROPLAST 10′S 4
CREPE BANDAGE 2″ 4
CREPE BANDAGE 4″ 6
ABSORBENT GAUZE 10′S 15
HYPOALLERGENIC TAPE 2
TRIANGULAR BANDAGE 6
SHEARS 1
SAFETY PIN 6
EYE SHIELD 6
EYE PAD 6
PEN TORCH LIGHT 1
DISPOSABLE GLOVES (PAIR) 4
DISPOSABLE RESUSCITATION PACK 2
BASIC ADVICE ON FIRST AID AT WORK 1

FIRST AID BOX MOM 50M

admin — Sun, 21 Oct 2012 11:21:33 +0000

MODEL NO: FABMOM50

Recommended minimum contents of First Aid Box by the Ministry of Manpower (MOM), for use by every 50 workers.

WHITE PLASTIC BOX 35cm x 26.5cm x 12cm (13.5” x 10.5” x 5”)
EUROPLAST 10′S 4
CREPE BANDAGE 2″ 2
CREPE BANDAGE 4″ 3
ABSORBENT GAUZE 10′S 10
HYPOALLERGENIC TAPE 1
TRIANGULAR BANDAGE 4
SHEARS 1
SAFETY PIN 4
EYE SHIELD 4
EYE PAD 4
PEN TORCH LIGHT 1
DISPOSABLE GLOVES (PAIR) 2
DISPOSABLE RESUSCITATION PACK 1
BASIC ADVICE ON FIRST AID AT WORK 1

FIRST AID KIT MOM 25M

admin — Sun, 21 Oct 2012 11:16:55 +0000

MODEL NO: FAKMOM25

Recommended minimum contents of First Aid Box by the Ministry of Manpower (MOM), for use where the number of workers does not exceed 25.

WHITE PLASTIC BOX 30.5cm x 21.0cm x 12.0cm
EUROPLAST 10′S 2
CREPE BANDAGE 2″ 1
CREPE BANDAGE 4″ 1
ABSORBENT GAUZE 10′S 5
HYPOALLERGENIC TAPE 1
TRIANGULAR BANDAGE 4
SHEAR SCISSORS 1
SAFETY PIN 4
EYE SHIELD 2
EYE PAD 2
PEN TORCH LIGHT 1
DISPOSABLE GLOVES (PAIRS) 2
DISPOSABLE RESUSCITATION PACK 1
BASIC ADVICE ON FIRST AID AT WORK 1

TOUCHNTUFF 92-600

admin — Tue, 16 Oct 2012 19:15:26 +0000

BRAND: ANSELL
MODEL NO: 92-600

Further testing of the TouchNTuff® by a certified body on an even wider range of chemicals confirms that it resists a greater variety of industrial chemicals for longer periods than any other nitrile disposable gloves
Manufactured from nitrile, TouchNTuff® offers up to four times the puncture resistance of comparable natural-latex gloves, and three times the resistance of similar neoprene gloves
It contains no natural rubber proteins, which means no risk of Type I allergies for the wearer. Primary skin irritation studies and Insult Patch tests have also shown no evidence of risk from irritation or allergic contact dermatitis
With a unique “Thin Nitrile Technology” formulation, this glove offers easy donning and strong grip in wet or dry conditions
The glove is highly versatile and suitable for many different uses
AQL 1.5 (EN374)
Ideal applications: Chemical handling; Laboratory analysis; Pharmaceuticals; Paint and spray shops; Printing industry; Electronics; Light assembly tasks; Light assembly of oil-coated pieces; Glass manufacturing; Handling of cytostatics; and Intricate parts handling

TOUCHNTUFF 92-500

admin — Tue, 16 Oct 2012 19:11:24 +0000

BRAND: ANSELL
MODEL NO: 92-500

Three times the puncture resistance of latex or PVC disposables
Thin Nitrile Technology produces a remarkable film of only 0.12 mm thick. Unparalleled comfort and sensitivity, yet this super-light film is surprisingly strong
100% nitrile; no waxes, silicone or plasticizers
Rolled cuff. Provides added protection at wrist and ensures a secure fit
Light and comfortable for wearing as a liner. Double donning is the safest practice when handling very dangerous materials
AQL 1.5 (EN374)
Ideal applications: Laboratory analysis; Chemical industry; Emergency services; Electronics; and Intricate parts handling

OILY WASTE CAN 21 GAL

admin — Sun, 14 Oct 2012 05:28:51 +0000

BRAND: JUSTRITE
MODEL NO: 09700 (RED) / 09701 (YELLOW)

Material Specifications: Steel
Capacity: 21 gallons (80 litres)
Dimension Exterior: 23.44″ H x 18.375″ Outer Dia. (595 H x 467 Outer Dia. mm)
Approvals: FM, TUV, UL
Compliance: OSHA

Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a poweder-coat finish provides chemical resistance.

Ten-year warranty.

OILY WASTE CAN 14 GAL

admin — Sun, 14 Oct 2012 05:27:37 +0000

BRAND: JUSTRITE
MODEL NO: 09500

Material Specifications: Steel
Capacity: 14 gallons (52 litres)
Dimension Exterior: 20.25″ H x 16″ Outer Dia. (514 H x 406 Outer Dia. mm)
Approvals: FM, TUV, UL
Compliance: OSHA

Ten-year warranty.

OILY WASTE CAN 10 GAL

admin — Sun, 14 Oct 2012 05:25:37 +0000

BRAND: JUSTRITE
MODEL NO: 09300

Material Specifications: Steel
Capacity: 10 gallons (38 litres)
Dimension Exterior: 18.25″ H x 13.937″ Outer Dia. (464 H x 354 Outer Dia. mm)
Approvals: FM, TUV, UL
Compliance: OSHA

Ten-year warranty.

OILY WASTE CAN 6 GAL

admin — Sun, 14 Oct 2012 05:24:12 +0000

BRAND: JUSTRITE
MODEL NO: 09100 (RED) / 09101 (YELLOW)

Material Specifications: Steel
Capacity: 6 gallons (20 litres)
Dimension Exterior: 15.875″ H x 11.87″ Outer Dia. (403 H x 302 Outer Dia. mm)
Approvals: FM, TUV, UL
Compliance: OSHA

Ten-year warranty.

COUNTERTOP OILY WASTE CAN 2 GAL

admin — Sun, 14 Oct 2012 05:23:39 +0000

BRAND: JUSTRITE
MODEL NO: 09200

Material Specifications: Steel
Capacity: 2 gallons (8 litres)
Dimension Exterior: 9.12″ H x 9.62″ Outer Dia. (232 H x 244 Outer Dia. mm)
Approvals: FM
Compliance: OSHA

OSHA compliant Oily Waste Cans are essential when using solvent soaked cloths and wiping rags. Rags and cloths soaked with thinners, linseed oil, combustible adhesives, and other flammable liquids present a serious fire risk when discarded improperly. The specially designed lid opens no more than 60 degrees and stays closed when not in use. This isolates the contents from fire sources and limits oxygen, virtually eliminating a risk of spontaneous combustion. All cans feature a galvanized steel body construction with durable powder-coat finish.

FIREFIGHTER ELECTRICAL INSULATING FIREMAN BOOT

admin — Sun, 14 Oct 2012 05:05:16 +0000

BRAND: HARVIK
MODEL NO: 9687L

Flame retardant upper with heat insulation
Reinforced rubber
Waterproof
High visibility with black and yellow contrast
Flame retardant rubber outsole
Fuel oil resistant sole suitable for inimical environment
Slip resistant vulcanized rubber outsole
Excellent abrasion resistant for extra durability
Withstand 18kV of life current at dry condition
Heel energy absorption design to minimize heel impact
Catered to enter high temperature
Cold insulation sole construction
Resistant towards mild acids and alkalines
Steel toecap and stainless steel midsole
European Standard CE Approved - EN 15090 : 2006 (F2 IS HI3 P T CI); and EN ISO 20345 : 2004 (SB P E CI SRA)

NEPTUNE 70-225

admin — Sun, 14 Oct 2012 04:54:03 +0000

BRAND: ANSELL
MODEL NO: 70-225

Constructed from high-tech Kevlar

GOLDKNIT 70-880

admin — Sun, 14 Oct 2012 04:53:00 +0000

BRAND: ANSELL
MODEL NO: 70-880

A high level of cut protection for the most demanding applications.

Yellow 7 gauge knitted 3 Ply Kevlar plated with cotton yarn as liner to provide excellent comfort
Reinforced thumb crotch with innovation compact knitting to enhance the protection level
Cut resistance
Size 9

LEATHER PALM GLOVE

admin — Sat, 13 Oct 2012 19:39:08 +0000

BRAND: CIG SAFETY
MODEL NO: CIG6465

High quality full leather palm
Soft palm lining

MEC DEX OIL FIELD PRO

admin — Sat, 13 Oct 2012 19:32:05 +0000

BRAND: MEC DEX
MODEL NO: OF-53

Level 4 (maximum) abrasion
Cut Level 3
Gloves for oil & gas extraction/mining/ petroleum
Anti slip gloves for grip & lifting
Synthetic leather glove with reinforced kevlar palm, finger tips and cross stitched with kevlar thread
Extra protection on fingers & knuckle back with vinyl TPR moulds
Open neoprene cuff for easier pulling on & off

MEC DEX OIL FIELD

admin — Sat, 13 Oct 2012 19:31:51 +0000

BRAND: MEC DEX
MODEL NO: OF-54

Level 4 (maximum) abrasion
Cut level 2
Antislip gloves for tacky grip & lifting
Gloves offer a super combination of comfort & grip protection for rig and platform professionals
Silicon printed soft synthetic leather palm
High visibility spandex fabric on back for increased safety
Direct inject moulded vinyl knuckle protection on back of hand
Fingers vinyl mould for pinch and impact protection
Extended neoprene wrist closure with supercuff technology
Usage: Oil & gas extraction, mining and rigging
EN388:4231

TYPE II STEEL SAFETY CAN 1″ METAL HOSE 5 GAL

admin — Fri, 12 Oct 2012 18:04:06 +0000

BRAND: JUSTRITE
MODEL NO: 7250130

Material Specifications: Steel
Capacity: 5 gallons (19 litres)
Dimension Exterior: 17.5″ H x 11.75″ Outer Dia. (445 H x 298 Outer Dia mm)
Fill/Pour Hole: 1.68″ (43 mm)
Hose Dimensions: 9″ L x 1″ Outer Dia. (229 L x 25 Outer Dia. mm)
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Go beyond protection and compliance with the added convenience of AccuFlowTM with Safe-Squeeze® trigger for safe and controlled pouring.

Justrite’s patented manifold and proportional flow-control Safe-Squeeze® trigger provides you the means to regulate the flow rate when handling flammable liquids. Fill port with ergonomic lift lever makes filling easy. Flexible 9″ (229-mm) long metal hose spout helps control the pour into small openings.

Made from high-grade coated steel, each can is pressure tested to ensure quality. The tough powder-coat finish resists chemicals and stands up to demands of rigorous use. Stainless steel flame arrester—equipped in all Justrite safety cans—dissipates heat to stop flashback ignition. Sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to protect against explosion. Large label ID zone provides writing space to identity contents, department location, or individual user name. All can sizes have extra capacity for adding two-cycle engine oil or other additives.

Easy-to-fill! Ergonomic lift lever opens the self-closing spout wide for easy filling. A full-length stainless steel flame arrester dissipates heat and allows deeper, secure insertion of the nozzle when filling.

Experience the benefits of Justrite’s Type II AccuFlow™ safety cans available in several colors and suitable for the storage of flammable liquids.This helps identify specific liquids, and avoids costly errors when using more than one liquid at a worksite.

Some color choices commonly used are:

Red cans for the storage of flammable liquids (and OSHA required)
Blue cans for the storage of kerosene
Yellow cans to designate the storage of diesel fuel
Green cans for the storage of oils

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE II STEEL SAFETY CAN 5/8″ METAL HOSE 5 GAL

admin — Fri, 12 Oct 2012 18:01:09 +0000

BRAND: JUSTRITE
MODEL NO: 7250120

Material Specifications: Steel
Capacity: 5 gallons (19 litres)
Dimension Exterior: 445 H x 298 Outer Dia mm
Fill/Pour Hole: 43 mm
Hose Dimensions: 229 L x 16 Outer Dia. mm
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Go beyond protection and compliance with the added convenience of AccuFlowTM with Safe-Squeeze trigger for safe and controlled pouring.

Justrite’s patented manifold and proportional flow-control Safe-Squeeze trigger provides you the means to regulate the flow rate when handling flammable liquids. Fill port with ergonomic lift lever makes filling easy. Flexible 9″ (229-mm) long metal hose spout helps control the pour into small openings.

Made from high-grade coated steel, each can is pressure tested to ensure quality. The tough powder-coat finish resists chemicals and stands up to demands of rigorous use. Stainless steel flame arrester, equipped in all Justrite safety cans, dissipates heat to stop flashback ignition. Sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to protect against explosion. Large label ID zone provides writing space to identity contents, department location, or individual user name. All can sizes have extra capacity for adding two-cycle engine oil or other additives.

Experience the benefits of Justrite’s Type II AccuFlow

safety cans available in several colors and suitable for the storage of flammable liquids.This helps identify specific liquids, and avoids costly errors when using more than one liquid at a worksite.

Some color choices commonly used are:

Red cans for the storage of flammable liquids (and OSHA required)
Blue cans for the storage of kerosene
Yellow cans to designate the storage of diesel fuel
Green cans for the storage of oils

Certified by FM, UL/ULC, and TUV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE II STEEL SAFETY CAN 2 GAL

admin — Fri, 12 Oct 2012 17:49:40 +0000

BRAND: JUSTRITE
MODEL NO: 7220120

Material Specifications: Steel
Capacity: 2 gallons (8 litres)
Dimension Exterior: 13.25″ H x 9.5″ Outer Dia. (337 H x 241 Outer Dia mm)
Fill/Pour Hole: 1.68″ (43 mm)
Hose Dimensions: 9″ L x 0.625″ Outer Dia. (229 L x 16 Outer Dia. mm)
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Go beyond protection and compliance with the added convenience of AccuFlowTM with Safe-Squeeze® trigger for safe and controlled pouring.

Some color choices commonly used are:

Red cans for the storage of flammable liquids (and OSHA required)
Blue cans for the storage of kerosene
Yellow cans to designate the storage of diesel fuel
Green cans for the storage of oils

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE I SHELF SAFETY CAN W/ FAUCET 5 GAL

admin — Fri, 12 Oct 2012 17:44:19 +0000

BRAND: JUSTRITE
MODEL NO: 7150140

Material Specifications: Steel
Capacity: 5 gallons (19 litres)
Dimension Exterior: 16.875″ H x 11.75″ Outer Dia. (429 H x 298 Outer Dia. mm)
Fill/Pour Hole: 1.58″ (40 mm)
Approvals: FM
Compliance: CARB, NFPA, OSHA

Justrite’s Steel Laboratory Safety Cans have all the benefits of the Type I cans. Added features make these the choice of lab professionals for safely dispensing hazardous liquids into test tubes, small flasks and beakers. Fill spouts have self-close, pressure-relief caps and stainless steel flame arresters. These cans also feature a vacuum-relief valve within the lid for smooth liquid flow, and self-closing faucets for trouble-free dispensing. Cans with the smaller No. 08540 faucet offer easier dispensing in lab environments, while the No. 08902 faucet is better suited for heavy, industrial use.

Shelf Cans have a faucet mounted two inches above the bottom to eliminate lifting the cans during dispensing.

TYPE I SHELF SAFETY CAN W/ FAUCET 2.5 GAL

admin — Fri, 12 Oct 2012 17:42:39 +0000

BRAND: JUSTRITE
MODEL NO: 7225140

Material Specifications: Steel
Capacity: 2.5 gallons (9 litres)
Dimension Exterior: 11.5″ H x 11.75″ Outer Dia. (292 H x 298 Outer Dia. mm)
Fill/Pour Hole: 1.68″ (43 mm)
Approvals: FM
Compliance: CARB, NFPA, OSHA

Shelf Cans have a faucet mounted two inches above the bottom to eliminate lifting the cans during dispensing.

TYPE I STEEL SAFETY CAN 5 GAL

admin — Fri, 12 Oct 2012 17:40:33 +0000

BRAND: JUSTRITE
MODEL NO: 7150100

Material Specifications: Steel
Capacity: 5 gallons (18.93 litres)
Dimension Exterior: 11.75″ Outer Dia. (298 Outer Dia. mm)
Fill/Pour Hole: 1.58″ (40 mm)
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Designed with a single spout for filling and pouring, the sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to guard against rupture or explosion.

Made from high-grade coated steel, each can is tested to guarantee 100% leakproof construction. The tough powder-coat finish resists chemicals and stands up to demands of rigorous use. Each Justrite safety can is equipped with a stainless steel flame arrester which dissipates heat to stop flashback ignition. Cans up to 1 quart (1 L) feature a trigger-release handle, while larger capacities have a swinging handle to greatly ease carrying of heavier loads. Large label ID zone on swing-handle cans provides writing space to identity contents, department location, or individual user name.

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE I STEEL SAFETY CAN 2 GAL

admin — Fri, 12 Oct 2012 17:27:58 +0000

BRAND: JUSTRITE
MODEL NO: 7120100

Material Specifications: Steel
Capacity: 2 gallons (9.47 litres)
Dimension Exterior: 11.75″ Outer Dia. (298 Outer Dia. mm)
Fill/Pour Hole: 1.58″ (40 mm)
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE I STEEL SAFETY CAN 1 GAL

admin — Fri, 12 Oct 2012 17:26:07 +0000

BRAND: JUSTRITE
MODEL NO: 7110100

Material Specifications: Steel
Capacity: 1 gallon (3.79 litres)
Dimension Exterior: 9.5″ Outer Dia. (241 Outer Dia. mm)
Fill/Pour Hole: 1.58″ (40 mm)
Approvals: FM, TUV, UL, ULC
Compliance: CARB, NFPA, OSHA

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

TYPE I STEEL SAFETY CAN W/ TRIGGER HANDLE 1 GAL

admin — Fri, 12 Oct 2012 17:11:47 +0000

BRAND: JUSTRITE
MODEL NO: 10301

Material Specifications: Steel
Capacity: 1 gallon (3.79 litres)
Dimension Exterior: 7.25″ Outer Dia. (184 Outer Dia. mm)
Fill/Pour Hole: 1.58″ (40 mm)
Approvals: FM, UL, ULC
Compliance: CARB, NFPA, OSHA

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

CLEAR POLYCARBONATE FACESHIELD

admin — Fri, 12 Oct 2012 07:58:42 +0000

BRAND: 3M
MODEL NO: WP96

Standard size, molded general purpose polycarbonate faceshield offers high impact face protection. Faceshield mounts quickly to any 3M™ Headgear without tools, snaps or cams. Requires protective eyewear, sold separately.

Molded stock
Clear faceshield
Developed for use in metalworking, utilities and many other industries
3M™ Easy-Change™ Faceshields mount quickly to 3M headgear
Meets the high impact requirements of ANSI Z87.1-2003

CAP MOUNT HARD HAT HEADGEAR

admin — Fri, 12 Oct 2012 07:56:28 +0000

BRAND: 3M
MODEL NO: H18

Cap-mounted headgear assembly can be used with any 3M™ Faceshield to help provide face protection. Designed to fit most hard hat accessory slots. High-strength thermoplastic crown provides impact resistance.

Mounts to 3M™ XLR8™ and other 3M™ Hard Hats via the accessory slots
Headgear system gives users a wide choice of faceshield materials, sizes, shapes, and tints for task specific requirements
Helps provide durable head protection to workers in metalworking, utilities, wood working, and many other industries
Meets the requirements of ANSI Z87.1-2003

RATCHET HEADGEAR

admin — Fri, 12 Oct 2012 07:52:49 +0000

BRAND: 3M
MODEL NO: H8A

Ratchet headgear for use with any 3M™ Faceshield. High-strength thermoplastic crown provides impact resistance and face protection. Adjustable ratchet suspension with five position crown strap.

Benefits

Adjustable ratchet suspension
Five position crown strap
Headgear gives users a wide choice of faceshield materials, sizes, shapes, and tints for task specific requirements
Offers durable head protection to workers in metalworking, utilities, wood working, and many other industries
Meets the requirements of ANSI Z87.1-2003

RATCHET HEADGEAR W/ POLYCARB. FACESHIELD

admin — Fri, 12 Oct 2012 07:47:19 +0000

BRAND: 3M
MODEL NO: H8A.WP96

A combination headgear and faceshield safety system. Includes H8A ratchet headgear and WP96 polycarbonate faceshield. Adjustable ratchet suspension. Molded faceshield provides impact protection. Requires protective eyewear, sold separately.

Five position crown strap
Meets the requirements of ANSI Z87.1-2003
Requires protective eyewear, sold separately
Helps offer durable head and face protection to workers in metalworking, utilities, wood working, and many other industries

SAFETY VEST T20

admin — Wed, 10 Oct 2012 18:10:41 +0000

BRAND: CIG SAFETY
MODEL NO: CIGIT20YL

100% Polyester knitting waistcoat
Colour : Fluorescent Yellow

SAFETY VEST T02

admin — Wed, 10 Oct 2012 18:05:02 +0000

BRAND: CIG SAFETY
MODEL NO: CIGIT02YL

CE class 22
Conform to EN471 Class 2
100% Polyester knitting waistcoat
Colour : Fluorescent Yellow only

SAFETY VEST T01

admin — Wed, 10 Oct 2012 18:01:46 +0000

BRAND: CIG SAFETY
MODEL NO: CIGIT01YL

CE class 22
Comform to EN471 Class 2
100% Polyester knitting waistcoat
Colour : Fluorescent Yellow only

TRIPOD & WINCH

admin — Wed, 10 Oct 2012 16:58:28 +0000

BRAND: CIG SAFETY
MODEL NO: CIGKM800 (TRIPOD) / CIGKM801 (WINCH)

Tripod is a product that can be used for easy access by a worker into challenging areas of activity like confined spaces. It provides a safe and suitable anchorage for controlled ascent and descent, as well as protection from falls in such areas.

For access in confined spaces
Fully adjustable aluminium telescopic legs
Having two auxiliary eye bolts and mounted pulleys as attachment points
Aluminium alloy cast head
Support shoes provided with rubber sole to increase friction and impart more stability
Strength of anchorage point greater than 10 kN
Weight: 16 kg
Every tripod provided with tripod bag CIGKM904
Every tripod provided with inbuilt fixture for attaching winch CIGKM801
Compliance EN 795 Class B

ENERGY ABSORBING FORKED LANYARDS

admin — Wed, 10 Oct 2012 16:56:15 +0000

BRAND: CIG SAFETY
MODEL NO: CIGKM351

Made of 12mm dia 3 strands polyamide rope with karabiner and two steel scaffold hooks
Energy absorption mechanism
Length: 1.5M
Conforms to EN355:2002 and SS 528:2006

ENERGY ABSORBING ROPE LANYARD CIGKM308

admin — Wed, 10 Oct 2012 16:54:23 +0000

BRAND: CIG SAFETY
MODEL NO: CIGKM308

Twisted rope lanyard with karabiner and scaffold hook
Energy absorption mechanism
Length: 2M
Conforms to EN355:2002

ROPE LANYARD 1.8M

admin — Wed, 10 Oct 2012 16:53:16 +0000

BRAND: CIG SAFETY
MODEL NO: CIG19612

Rope: polyamide 12mm, 3strands
Length: 1.8M
Connector – chrome plated steel forged big hook with opening gate 53mm, zinc-plated steel carabiner according to EN362
Static strength : >22kN
Net weight : 0.75kg
CE EN354

TWISTED ROPE LANYARD 2M CIG208

admin — Wed, 10 Oct 2012 16:52:07 +0000

BRAND: CIG SAFETY
MODEL NO: CIG208

Twisted rope lanyard with karabiner and scaffold hook
Length: 2M
Conforms to EN354:2002

TWISTED ROPE LANYARD 2M CIG207

admin — Wed, 10 Oct 2012 16:51:05 +0000

BRAND: CIG SAFETY
MODEL NO: CIG207

Twisted rope lanyard with karabiner and snap hook
Length: 2M
Conforms to EN354:2002

SAFETY VEST W01

admin — Wed, 10 Oct 2012 16:51:02 +0000

BRAND: CIG SAFETY
MODEL NO: CIG1W01OR

100% Polyester mesh high Visibility vest with high reflective PVC tape
Colour : Fluorescent Orange only

DEVON WELLINGTON

admin — Wed, 10 Oct 2012 16:49:33 +0000

BRAND: DUNLOP
MODEL NO: H142211

The Devon Wellington from Dunlop® incorporates a steel toe cap, steel midsole, slip resistant sole, and it is also antistatic. This is an economic, versatile boot which is suitable for most garden and landscape working environments.

Conforms to ISO20345 Safety Footwear Standard.
Toe protection tested to 200 joules impact. Heel energy absorption 20 joules.
Steel midsole protection to 1100 neutrons. Antistatic.
Upper made from PVC/nitrile rubber. Cleated outsole.
Standard ISO20345
Category S5.
PVC sole Slip resistant sole. Dirt Repellent

PVC BOOTS

admin — Wed, 10 Oct 2012 16:48:11 +0000

BRAND: CIG SAFETY
MODEL NO: CIG107

PVC + Special Type Material
Lining Anti High Temperature Fabric Steel Toe Cap
Height : 40 Cm
Size : 6-12
Color : Yellow Upper, Black Sole, Black Upper, Black Sole
Option available : Steel Sole
Complies with ASTMF2412, EN 20345

FULL BODY HARNESS W/ BELT

admin — Wed, 10 Oct 2012 16:47:16 +0000

BRAND: CIG SAFETY
MODEL NO: CIGKM42

Two chest attachment textile loops and a dorsal attachment D-ring for fall arrest
Two lateral D-rings for work positioning
Adjustable shoulder, thigh-straps and waist belt
Shoulder and thigh-straps differentiated by a dual colour scheme
Tool holder loops and rings at the back
Ideally positioned sit-strap for extended comfort
Conforms to EN 361:2002 and EN 358:1999

FULL BODY HARNESS

admin — Wed, 10 Oct 2012 16:44:44 +0000

BRAND: CIG SAFETY
MODEL NO: CIGKM11

A dorsal attachment D-ring for fall arrest
Adjustable thigh-straps
Shoulder and thigh-straps differentiated by a dual colour scheme
Ideally positioned sit-strap for extended comfort
Conforms to EN 361:2002 and SS 528:2006

STAINLESS STEEL COMBINATION SHOWER

admin — Wed, 10 Oct 2012 16:36:51 +0000

BRAND: CIG SAFETY
MODEL NO: CIG15035000

BETTA

admin — Wed, 10 Oct 2012 16:22:25 +0000

BRAND: CIG SAFETY

Wrap around, single piece lens that will fit most faces.
Exceptional comfort protection and fit
Fits over most prescription spectacles
High impact resistant polycarbonate lens
Complies with ANSI Z87.1 and CE EN 166 standards
13CIG3001: Clear Frame with Clear Lens
13CIG3002G: Grey Frame with Grey Lens

PIRANHA

admin — Wed, 10 Oct 2012 16:21:00 +0000

BRAND: CIG SAFETY

One piece lens design with integrated sideshields
Pleasantly light-weight
Adjustable temple length and ratchet inclination system for a good fit
Ultra Violet (UV) protection
Hard coating for scratch resistance
Complies with ANSI Z87.1 standards
Available in Clear and Grey lens
13CIGA1026C1BLU: Blue Frame with Clear Lens
13CIGA1026C2BLU: Blue Frame with Grey Lens
13CIGA1026C1B: Black Frame with Clear Lens
13CIGA1026C2B: Black Frame with Grey Lens

NEW RAMSES

admin — Wed, 10 Oct 2012 16:15:14 +0000

BRAND: CIG SAFETY

Safety spectacle elegant
One piece curved lens with anti scratch PC UV lens
Nylon leg extra lightweight meet ANSI Z87.1
Complies with ANSI 287.1 standard
13CIGA12111: Clear Grey Tip Frame with Clear lens
13CIGA12112: Smoke Grey Tip Frame with Grey lens
13CIGA12113: Clear Grey Tip Frame with I/O lens
13CIGA12114: Amber Grey Tip Frame with Amber lens

COBIA

admin — Wed, 10 Oct 2012 16:10:39 +0000

BRAND: CIG SAFETY

Single piece lens with side shields
Nose pad for better fit
UV and scratch resistant
Complies with ANSI Z87.1 standard
13CIG851C: Clear Frame, Clear Lens
13CIG852S: Smoke Frame, Smoke Lens
13CIG855C: Clear Frame, Clear with Silver Mirror Lens
13CIG856S: Smoke Frame, Smoke with Silver Mirror Lens

ANGLER

admin — Wed, 10 Oct 2012 16:08:37 +0000

BRAND: CIG SAFETY

Single piece lens to suit most face
Wrap arround, frameless style for exceptional comfort and protection
Light weight anti scratch and available in anti fog coating
Complies with ANSI Z87.1 standard
13CIG881C: Clear Frame, Clear Lens
13CIG882S: Smoke Frame, Smoke Lens
13CIG885C: Clear Frame, Silver Mirror Lens
13CIC886S: Smoke Frame, Silver Mirror Lens
13CIG884FC: Clear Frame, Amber Lens with Anti Fog

FENDALL PORTA STREAM I

admin — Wed, 10 Oct 2012 16:01:58 +0000

BRAND: HONEYWELL
MODEL NO: 32-000100-0000

Delivers 6 minutes of uninterrupted, hands-free flushing — without costly plumbing. Completely portable, the gravity-fed flow begins immediately when the nozzle pull strap is removed.

ULTRAGUARD 9405.714

admin — Tue, 09 Oct 2012 05:18:07 +0000

BRAND: UVEX
MODEL NO: 9405.714

Large goggle with front ventilation system, ideal for people who wear prescription glasses. Comfortable fit thanks to soft face and nose padding. Upper part of body frosted to protect against light reflection. Easy headband adjustment. Suitable for use with half masks and filtering half masks.

ULTRAVISION 9301.906

admin — Mon, 08 Oct 2012 17:18:02 +0000

BRAND: UVEX
MODEL NO: 9301.906

Comfortable, ergonomically designed full vision goggle with unrestricted side visibility provided by 180° panorama lens. Soft face and nose cushioning enables totally
airtight and pressure-free fit. Exceptional wearer comfort guaranteed by unrivalled design, broad and fully adjustable headband, sophisticated ventilation system and optional non-fog lens. Easily replaceable lens. Special versions are available featuring tear-off lenses, additional comfort cushioning, flame-retarding PVC in signal red.

ULTRASONIC 9302.245

admin — Mon, 08 Oct 2012 17:15:56 +0000

BRAND: UVEX
MODEL NO: 9302.245

Pioneering full vision goggle with exceptional wearer comfort. The combination of two different materials (hard/soft components) means that pressure never becomes a problem, even after long periods of wear. The soft flexible component adapts to individual face curvature, providing complete side protection even over prescription
spectacles. The outstanding ventilation ensures a pleasant non-irritating interior environment. Further key features of this top goggle include sporty design,
panorama field of vision and easy lens replacement.

ULTRASPEC 9165.005

admin — Mon, 08 Oct 2012 17:12:23 +0000

BRAND: UVEX
MODEL NO: 9165.005

Modern single lens safety spectacle with large panorama lens and extremely broad field of vision. Ergonomically designed temples ensure a good fit. Effective indirect ventilation thanks to slats in temples. Extremely impact-resistant polycarbonate lens with advanced UV protection.

ASTROSPEC 9161.014

admin — Mon, 08 Oct 2012 17:11:37 +0000

BRAND: UVEX
MODEL NO: 9161.014

Very comfortable overspecs with unrestricted lateral vision, fits over most prescription spectacles. Exceptional pressure-free fit thanks to uvex duoflex temples.

The uvex 9161.014 is a more basic model with polycarbonate side arms but no lens coatings.

ASTROSPEC 9161.005

admin — Mon, 08 Oct 2012 17:10:54 +0000

BRAND: UVEX
MODEL NO: 9161.005

Very comfortable overspecs with unrestricted lateral vision, fits over most prescription spectacles. Exceptional pressure-free fit thanks to uvex duoflex temples.

SUPER G 9172.265

admin — Mon, 08 Oct 2012 17:10:05 +0000

BRAND: UVEX
MODEL NO: 9172.265

This exciting eyewear concept unites innovative technologies and high-tech materials.

The lens
Using state-of-the-art manufacturing processes, an extremely thin lens with exceptional optical clarity can be created. The lenses have ideal aerodynamics and are angled forwards to provide excellent ventilation, keeping the eyes comfortable.

The frame
The frame is made of ultra light, high-tech polymers, guaranteeing maximum flexibility. The innovative side piece concept features uvex x-stream-technology for an excellent, non-slip fit and a wide range of applications.

The result
The super g is completely metal-free and provides top-level protection – and all that at only 18 g!

SUPER OTG 9169.065

admin — Mon, 08 Oct 2012 17:09:25 +0000

BRAND: UVEX
MODEL NO: 9169.065

With its ADVANCED OPTICS BY SCIENCE technology, uvex is exploring new avenues in the development of optical reproduction properties above and beyond the current standards. uvex super OTG boasts uvex’s cutting-edge lens technology.

It also features hingeless side pieces made of extremely impact-resistant Grilamid® with soft ear pieces. It therefore combines the benefits of temple glasses with the comfort of a headband. The flexible side piece concept means the glasses can be adapted to different wearing scenarios, regardless of whether they are worn together with prescription glasses or not.

SKYBRITE SX2 9197.880

admin — Mon, 08 Oct 2012 17:08:34 +0000

BRAND: UVEX
MODEL NO: 9197.880

Extremely lightweight and modern safety spectacle with outstanding field of vision and exceptional adaptability. The temples are individually adjustable in 5 different positions with integrated stop lock. Their softness ensures a pressure free fit and their inclination can be finely adjusted. Lens and frame made from extremely impact resistant plastic. Very simple lens replacement. Spectacle provides maximum UV protection.

SKYPER SX2 9197.266

admin — Mon, 08 Oct 2012 17:07:45 +0000

BRAND: UVEX
MODEL NO: 9197.266

SKYPER SX2 9197.265

admin — Mon, 08 Oct 2012 17:06:43 +0000

BRAND: UVEX
MODEL NO: 9197.265

I-VO 9160.285

admin — Mon, 08 Oct 2012 17:05:41 +0000

BRAND: UVEX
MODEL NO: 9160.285

uvex i-vo, the “eye-volution” in protective eyewear. When it comes to comfort and looks, i-vo does not compromise, making these spectacles incredibly popular among wearers. They are not only uncompromisingly safe but also excellent in terms of comfort and design. This is guaranteed because of uvex’s duo component technology, which ensures that the spectacles not only tough, but also smart. Soft components around the sensitive parts of the face (nose, forehead, ears) guarantee permanent maximum comfort.